Product features:
Ball screw drive, standard two-phase stepper motor, can provide high resolution and positioning accuracy
· Linear slider guide rail, high strength, strong load capacity, good durability
· The mounting surface of the guide rail adopts precision machining technology, which makes the product have high motion accuracy
· Built-in three sensors (positive and negative limits and zero positions), using high flexibility cables and cable modular, more convenient maintenance
Product parameters:
| Model number | PT-LA60(50) | PT-LA60(100) | PT-LA60(150) | |
| Mechanical specification | Travel (mm) | 50 | 100 | 150 |
| Table size (mm) | 60×60 | |||
| Driving mechanism | Ball screw，φ8×2 | |||
| Guide rail | Linear slider guide | |||
| Body material and surface treatment | Aluminum alloy, black anodized | |||
| Weight (Kg) | 0.73 | 0.85 | 1 | |
| Precision specification | Resolution (full step/half step, μm) | 10/5 | ||
| 20 Subdivision resolution (μm) | 0.5 | |||
| Maximum speed (mm/s)* | 20 | |||
| Repeated positioning accuracy (μm) | ≤±2 | |||
| Back clearance (μm) | ≤1 | |||
| Return clearance (μm) | ≤3 | |||
| Static parallelism (mm) | ≤0.08 | |||
| Motion straightness (μm) | ≤20 | |||
| Motion parallelism (μm) | ≤30 | |||
| Special specification | Microstep capacity (μm) ** | ≤2 | ||
| Repeated positioning accuracy during micro-step movement (μm) | ≤±1 | |||
| Return clearance during microstep movement (μm) | ≤0.5 | |||
| Electrical specification | Motor and step Angle (°) | Two phase 28 stepper motor, step Angle 1.8 | ||
| Motor brand and model | Shinano, STP-28D1003-08 | |||
| Operating current (A) | 1.3 | |||
| Motor torque (N·m) | 0.0785 | |||
| Drive brand and model (additional) | Ming Chi, SR2 | |||
| Slide joint | DB9(The needle) | |||
| Cable type of the slide connector | High Flexibility Cable (Germany and soft) | |||
| Cable length of slide connector (m) | 0.2 | |||
| Limit sensor (built-in) | 2个GP1S09xHCPI(JapanSHAPP) | |||
| Origin sensor (built-in) | 1个GP1S10xHCPI(JapanSHAPP) | |||
| Sensor supply voltage (V) | DC5-24V±10% | |||
| Control output | NPN open collector output; DC5-24V8mA or less Residual voltage below 0.3V (load current 2mA) | |||
| Output logic | When detecting (shading); Output transistor ON | |||
| load | load（kg） | 4 | ||
| Vertical load (Kg) | 2 | |||
| Inverted load (Kg) | 2 | |||
| * Note: The maximum speed is calculated according to the theoretical speed and actual test value of the stepper motor at 600 RPM under no-load conditions; | ||||
Product size:
We'd be happy to have you working with us. In order to save your time, when choosing products, please check the parameters or communicate with our sales, to avoid the product you buy, because the parameters are not consistent with your use requirements, delay your construction schedule. We thank you again for your support.
