This motorized three-dimensional stage is composed of XY axis motorized moving stage PT-XY50 and motorized rotating stage PX110-100.
Motorized integral combination stage: PT-XY50
Product features:
※ stepper motor is equipped as standard, which can be automatically controlled by the company's motion controller.
※ the product is small and light in structure, which is suitable for use under light load and low speed, as well as in scientific experiments.
※ high quality fine grinding lead screw drive, small lead, the same fine fraction can achieve high resolution.
※ the ingenious structural design of air elimination check nut can minimize the clearance of grinding lead screw pair.
※ the precision square guide rail is comfortable to move, and has the function of laterally adjusting the guide rail preload and eliminating clearance. It can be used in multi-dimensional combination.
※ the fine grinding of the bottom plate of the electric moving table and the reasonable fixing mode of the guide rail greatly reduce the pitch and yaw of the electric moving table, and greatly improve the straightness and parallelism of the movement.
Model Number | PT-XY50 | |
Structure | X,Y Axis Travel | 50 Mm |
Platform Size | 155×155mm | |
Screw Specification | Self Machining Screw Pair | |
Guide | Advanced Cross Roller Guide | |
Stepping Motor (Step Angle) | Domestic Ordinary 28 (1.8 °) Motor | |
Material | Aluminium Alloy | |
Surface Prepartion | Black-Anodized | |
Load Capacity(Kg) | 10 | |
Weight(Kg) | 3.2 | |
Accuracy | Resolving Power | 5μm(No Subdivision),0.625μm (8 Subdivisions) |
Velocity | 6mm /Sec | |
Repeat Positioning Accuracy | 40μm | |
Absolute Positioning Accuracy | 50μm | |
Straightness | 5μm | |
Motion Parallelism | 15μm | |
Pitching | 50″ | |
Yawing | 25″ | |
Return Clearance | 2μm | |
Lose Step | 2μm | |
Accessory | Installing Grating Ruler (Optional) | |
Reloading Servo Motor (Optional) | ||
PT-XY50 Product dimension drawing:
Precision electric rotary stage (worm gear): PX110-100
Product characteristics: (the accuracy Description column in the table is electrical performance parameters)
※ the stepper motor is equipped with 9-pin interface as standard, which can be automatically controlled by the company's motion controller.
※ the rotating shaft system is precision machined by multi-channel technology, with high matching accuracy, large bearing capacity and long service life.
※ it adopts the worm gear and worm structure with precise research and matching, with comfortable movement, arbitrary forward and reverse rotation and small empty return.
※ the ingeniously designed air return structure can adjust the air return gap caused by long-term use.
※ the special structural design ensures the low end jump and eccentricity of the rotating table, making the rotating motion more stable.
※ the central through hole of the rotary table has strict requirements for coaxiality with the rotary center, and the central aperture of the rotary table has strict matching tolerance limits, which is convenient for customers to make precise positioning.
※ the scale circle on the periphery of the table is a laser marking scale, which can rotate relative to the table to facilitate initial positioning and reading.
※ stepper motor and worm are connected through high-quality elastic coupling, with synchronous transmission, good depolarization performance, reduced eccentric disturbance and low noise.
※ the electric rotary table can be used horizontally or vertically, and can form a multi-dimensional electric adjustment table with other types of tables.
※ optional: add limit function, add initial zero position, replace servo motor, install rotary encoder, and accept product restructuring and customization.
※ the three-phase stepping motor or servo motor can be replaced to increase the speed and torque of the rotary table.
Model Number | PX110-100 | |
Structure | Rotation Range | 360° |
Platform Size | φ100mm | |
Transmission Ratio | 180∶1 or 90:1 | |
Drive Mechanism | Worm Gear | |
Travel Guide | Bearing | |
Stepper Motor (1.8°) | 42BYG | |
Material Surface | Aluminum Alloy (Black-Anodized) | |
Central Load | 45kg | |
Weight | 1.7kg | |
Accuracy | Design Resolution | 0.01°(Non-MS Driver) |
0.0005°=1.8″(20MS Drive) | ||
Max Velocity | 25°/sec | |
Repeatability | 0.005°=18″ | |
Absolute Accuracy | 0.01°=36″ | |
End jump accuracy | 15μ | |
Backlash(μm) | 0.005°=18″ | |
Eccentricity | 5μ | |
Lost Motion(μm) | 0.005°=18″ | |
Parallelism | 80μ | |
PX110-100 Product dimension drawing:
We'd be happy to have you working with us. In order to save your time, when choosing products, please check the parameters or communicate with our sales, to avoid the product you buy, because the parameters are not consistent with your use requirements, delay your construction schedule. We thank you again for your support.
