Reasons for tilting of electric lifting platform
1. Improper operation
When using the lifting table, it is not operated according to the specifications, resulting in equipment imbalance. The long-term instability is easy to increase the wear of the equipment, resulting in the inclination of the equipment.
2. Lifting platform underframe tilt
Because many small elevator platform manufacturers lack high-precision cast iron platform, it is difficult to control the processing level of underframe only by manual welding, and it is difficult to control the accuracy only by human eyes, and the quality is not stable enough.
3. Quality cannot be guaranteed
In order to save money, many elevator platform manufacturers do not buy hole spacing positioning devices and rely on the experience of workers to control the hole spacing, resulting in inconsistent hole spacing and serious inclination of elevator platform in the process of elevator.
Solution to the inclination of electric lifting platform
1. Ensure that the hole spacing of the supporting rod is consistent
In order to save costs, many small lifting platform manufacturers do not buy and use hole spacing positioning devices, and only rely on the experience and eyes of workers to control the hole spacing, which is easy to cause inconsistent hole spacing. If they use lifting platforms with inconsistent hole spacing, it is easy for the table top to tilt in the process of rising. Therefore, we choose professional manufacturers when purchasing to ensure that the hole spacing of the support rod is consistent and avoid your worries.
2. Zero error in underframe production
Because the informal lifting platform manufacturers are not proficient in professional technology and lack of high-precision cast iron platform technology, it is far from enough to rely only on the manual welding control level, because there will be great errors only by human eyes, and the product quality is not stable enough. The lifting tables produced by regular companies adopt high-precision welding equipment, and the whole underframe production adopts mechanical automation to ensure zero error.
3. Keep the ground level for platform operation
When using the lifting platform, the four legs of the platform must be supported on a solid ground. When supporting the legs, the base shall be horizontal at the same time. When the mobile lifting platform rises, the small inclination of the ground will be enlarged when it reaches the top of the table. When the inclination is greater than 15 degrees, the platform will be threatened to topple. Therefore, the ground for platform operation must be solid and the base level.
