What are the effects of linear slide module overload?

The carrying capacity is one of the main parameters that we are more concerned about for the linear sliding platform module in the purchase, not the same structure, not the same model specifications of the linear sliding platform module, the carrying capacity is also different. If overload is applied for efficiency, it will only lead to faults, and in severe cases, it may cause undistorted safety accidents. So what are the hazards of linear slide module overload applications? Today's PDV summarizes the following aspects:

1. The motor is burned

Motor is the key to the linear slide unit module drive electrical equipment, motor in the application process is linear slide unit module, the key driver of output, the overload CLP opportunity than rating application output power, motor speed than by hot extrusion, inhibition of motor is very easy to was burnt down in the whole process of overload application.

2, coupling cracking

For those who know about couplings, it is an important part of the motor drive linear slide module, without which the motor is unlikely to be as stable. In the whole process of overload application, the coupling should be a position under greater working pressure. Under the working pressure of both screw and motor, it is very easy to appear the problem of coupling cracking.

3, screw damage is easy to break

In the selection of "load" large linear slide module, then must be everyone's screw type linear slide module. The screw is a physical component of the key drive of the screw type linear slide module. When overloaded, the working pressure will exceed its rated current. The screw will be hot and lead to screw damage.

We usually in the application of the whole process to prevent the linear slide module overload situation. Can not be due to any reason and load application, otherwise, the final adverse effects will make us regret.