Manual digital linear stage supplier introduces you:
Electric platform-mid-year maintenance
1. Priority is given to the order of half a year or 500 hours.
2. Raise the lifting platform all the way up and support it into a supporting pole.
3. Check all hydraulic pipes and joints. The pipeline must not be damaged, the joints must not be loose, and all joints must be tightened.
4, check the piston rod of the oil cylinder and the transparent plastic vent pipe for oil. If too much fluid is present, the seals of the cylinders may fail or the tank may be overfilled.
5. Remove and disassemble the down valve, blow the plunger with compressed air, install it, and reinstall it.
6. Discard all the hydraulic oil. Loosen the joint, take out the suction filter, clean it with kerosene, clean it with compressed air, then put it back into the fuel tank and connect the pipeline.
7. Put on new oil. Do not continue to use the old oil, or the moving parts in the system will wear out faster.
6 Safety and optional editing of lifting platform
Lifting platform safety:
1. Except for electrical professionals, no one is allowed to disassemble and install electrical appliances at will to prevent electric shock or accidental connection.
2. When working on the lifting platform, prevent hands, feet and clothes from being squeezed.
3. After the lifting platform is lifted, if it is necessary to stay for a period of time, or when it needs to enter the workbench for maintenance, the lifting platform must be supported by a support bar to prevent the worktable from falling down and hurting people.
4. Do not arbitrarily adjust the overflow valve. The hydraulic components in the hydraulic system work at the specified pressure. When the pressure is too high and the relief valve is still not open, the workbench may suddenly land, causing damage to people, machines and objects.
5. Before disassembling any part of the hydraulic system, you must first release the pressure to prevent the pressure oil from spraying out and causing the workbench to fall and hurt people.
PT-GD105 High Precision Motorized Linear Stage
Selection of lifting platform:
When purchasing a motorized linear stage, an enterprise must first consider the use scope, frequency of work, utilization rate, rated lifting capacity and other factors of the enterprise, and choose a lift that is suitable for the working level of the unit. Conduct market research based on the proposed technical parameters. The first condition for the selected supplier is the credibility of the manufacturer, and then the ability of after-sales service. As long as the lifting platform is of good product quality, excellent performance, and complete safety devices, it can be used as an object of choice at a reasonable price.
After the equipment arrives, check whether the random technical information is complete, whether the random accessories, tools, and accessories are consistent with the list, and whether the equipment and accessories are damaged or defective, and make a record of unpacking and acceptance.
Production of electric lifting platform:
The production of electric lifting platform adopts heavy-duty design, uses 380V / 50HZ AC power supply, and uses imported high-quality pumping stations to ensure the stable lifting of the goods. In the design of the electric lifting platform, some adopt anti-clamping fork design, which can prevent pinching, ensure the safety and reliability of the equipment, and comply with European EN1757-2 and American ANSI / ASME safety standards.
