Optical Platform Working Principle And Maintenance

The optical platform pursues the level, and the entire table is extremely flat when it is first processed. After that, the table top is placed on the airbag with four joints to ensure the level of the countertop. The table top is covered with a square threaded engineering threaded hole, and the holes and corresponding screws can be used to fix the optical components. In this way, when you complete the construction of the optical device, the system is basically not subject to external disturbances and changes. Even if the table is pressed, it will automatically return to the level due to the airbag.

Maintenance and maintenance of optical platform instruments:

1 All optical glass devices should be kept clean and avoid various pollution. If it is dusty, use an ear wash and a soft brush to remove dust and wipe it with a fine velvet cloth. Fingerprints and stains should be rubbed off with a small amount of ethanol ether mixture (7:3). Special protection should be strengthened during the wet season.

2 A small amount of lubricant may be added to the rotating and sliding parts of the mechanical structure. A very thin layer of oil should be applied to the platform to protect the surface.

PDV is specialized in produce Motorized Linear Stage . Our products are very popular, if you are interested in our products, please contact Precise Electric Translating Platform Supplier as soon as possible.